25
GETTING STARTED
1. Channel: Current channel that the radio is
using, depending upon radio model.
2. Frequency: The frequency the radio uses to
transmit/receive.
3. Interference Eliminator Code: These codes
help minimize interference by providing a
choice of code combinations.
4. Scramble Code: Codes that make the
transmissions sound garbled to anyone
listening who is not set to that specific code.
For details of how to set up frequencies and
CTCSS/DPL codes in the channels, refer to
“Advanced Configuration Mode” on page 34.
63M03_A_BRCAN_en.book Page 25 Monday, November 19, 2018 10:16 AM
To Next Page
Loading...
Need help?
General
