32
GETTING STARTED
Call Tones
Call Tones feature allows you to transmit an
audible tone to other radios on the same
channel to alert them that you are about to talk
or to alert them without speaking.
In ‘Call Tone Selection Mode’ you can
configure the type of call tone for the radio. The
settings available are dependent on the
maximum number of call tones your radio
supports.
To program Call Tones, press the
(Menu)
button until the radio displays the solid letters
“TONE” and blinks the current radio Call Tone
as follows:
Press the and buttons to toggle
through the Call Tones settings and select the
desired call tone value (0, 1, 2, 3, 4, 5, or 6).
Each time you select a different value, your
radio sounds the selected call tone (except for
value ‘0’).
Once you have selected the desired call tone,
press the (Menu) button to save and
proceed to the next step, or turn OFF the radio
to exit without saving changes. Call Tones can
also be configured using CPS.
63M03_A_BRCAN_en.book Page 32 Monday, November 19, 2018 10:16 AM
To Next Page
Loading...
Need help?
General
