35
PROGRAMMING FEATURES
the ‘Programming Mode’ options, the radio
automatically saves all changes made, even if
you turn OFF the radio.
• Exit the ‘Programming Mode’ without saving
changes (as long as you have not wrapped
around to the beginning of the ‘Programming
Mode’ options) by turning OFF the radio.
PROGRAMMING RX (RECEPTION)
FREQUENCIES
Once you have chosen the channel you want to
program, short press the PTT button or
(Menu) button to scroll through the options until
you reach ‘Frequency Programming Mode’.
The radio display shows the frequency code as
follows:
To program the desired frequency, use the
and buttons to navigate to the
frequency code value you need. Long press
the PTT button to exit and save, or short press
the PTT button to move to the next
programming feature without saving.
PROGRAMMING RX (RECEPTION) CODES
(CTCSS/DPL)
Once you have chosen the channel you want to
program, short press the PTT button or
(Menu) button to scroll through the options until
you reach the ‘Code Programming Mode’.
The radio display shows the CTCSS/DPL code
as follows:
To program the desired code, use the and
buttons until you get the CTCSS/DPL code
63M03_A_BRCAN_en.book Page 35 Monday, November 19, 2018 10:16 AM
To Next Page
Loading...
Need help?
General
