3.0 07/2009
- The data and information in this manual are subject to change at any time.
- (24V – 25W) Flashing light: it
activates during gate movement
and pre-fl ashing mode can also be
selected …
OR
- (24V-25W) cycle lamp: which stays
on during the entire opening and
closing cycles (Automatic Closing
and Obstacle Detection functions
must be activated, see pages 27 and
28).
N.B. For this option you need to
connect up antenna item code
OA533.
Warning light (24V – 3W): It
stays on to signal that “gate
is open”.
WARNING AND LIGHTING DEVICES
RG58 cable
Sock
To Next Page
Loading...