Motostar ECLISTAR User Manual (English)

Questions and Answers:

M
marshallkimberlyAug 1, 2025
What to do if my Motostar ECLISTAR neither opens nor closes?
- X
  xcolemanAug 1, 2025
  If your Motostar Gate Opener neither opens nor closes, several factors could be at play. First, ensure that there is main power supply by checking the connections and general switches. If the gearmotor is released, close the hatch. Also, verify the transmitter battery isn't flat and replace the batteries if needed. Check if the photocells are continuously engaged, and if so, clean the front pieces and check the connections. Lastly, the command devices may be stuck or broken, so be sure to check them.
N
nwattsAug 10, 2025
Why does my Motostar Gate Opener open but not close?
- R
  Richard PattersonAug 10, 2025
  If your Motostar Gate Opener opens but refuses to close, the issue might stem from the photocell remaining engaged. To resolve this, clean the front pieces of the photocell and check the connections to ensure they are properly functioning.
W
williamsoncarrieAug 21, 2025
How to fix the flashing light on a Motostar Gate Opener?
- J
  Jasmine HorneAug 21, 2025
  If the flashing light on your Motostar Gate Opener isn't working, the most likely cause is a burned-out light bulb. Replace the bulb to restore the flashing light's functionality.

Motostar ECLISTAR Specifications

General

Brand	Motostar
Model	ECLISTAR
Category	Gate Opener
Language	English

Summary

General Characteristics

Components

Lists and illustrates the main parts included in the gate operator kit.

Technical Characteristics

Details electrical and mechanical specifications of the gearmotor and control panel.

Dimensions

Provides the physical measurements of the gearmotor unit in millimeters.

Main Component Parts of a Standard Installation

Illustrates a typical installation setup showing all primary components and their connections.

Limits to Use

Specifies the maximum gate leaf width and weight the operator can handle.

Installing the Automation

Gate Checks Before Installing

Ensures the gate structure is sturdy and has proper mechanical endstops.

Preliminary Operations and Bracket Mounting

Details setting up tubes, inserting cables, and positioning base and head brackets.

Securing the Gearmotor

Instructions for mounting the gearmotor unit to the base bracket and connecting arms.

Adjusting the Endstops

Adjusting the Opening Endstop

Guides the process of setting the gate's fully open position using cams and microswitches.

Adjusting the Closing Endstops

Details setting the gate's fully closed position, including precautions for gate width.

Adjusting the Opening Endstop (Right Hand)

Specific instructions for setting the opening endstop for right-hand gearmotors.

Adjusting the Closing Endstop (Right Hand)

Specific instructions for setting the closing endstop for right-hand gearmotors.

Control Panel

Control Panel Legend and Fuse Table

Explains the numbered components of the control panel and lists fuse specifications.

Assembling and Securing the Casing

Instructions for assembling and mounting the control panel casing to the wall.

Control Board Functions and Description

Details the control board's features, functions, and how it handles obstacles and commands.

Electrical Connections

Diagrams and instructions for wiring the gearmotors, transformer, and power supply.

Command Devices

Explains connections for stop buttons, command buttons, and 24V accessories.

Warning and Lighting Devices

Details connections for warning lights, flashing lights, and cycle lamps.

Safety Devices: Photocell Connections

Guides on connecting photocells for gate reopening or temporary stop functions.

Function Selection

Explains how to configure gate functions using dip switches.

Adjusting Functions

Details how to adjust trimmers for delay times, automatic closing, and sensor sensitivity.

Checking Endstop Assembly Settings

Verifies and readjusts endstop settings after installation for correct opening and closing points.

Programming the Radio Code

Instructions for inserting the radio card and memorizing/duplicating transmitter codes.

LED Control Functions

Explains the meaning of the LEDs on the control board for status indication.

Final Operations

Covers final installation steps like securing covers and performing system inspection.

Motostar ECLISTAR User Manual

Table of Contents