P a g e | 3
User Guidelines – Flosense 4.0 Manifold 16-06-2020 Version 002
If there are safety or operational changes to the Flosense system, please stop immediately
and notify disturbance to the responsible person.
Do not make changes, expansions and renovations on the Flosense system which could
impact the safety, without seeking the supplier's permission beforehand.
Spare parts must conform to the technical requirements established by the manufacturer.
These requirements are always met by original spare parts.
2.4. Safety precautions in relation with the individual operating
phases
Normal running
Any unsafe working methods should be omitted.
Take any necessary precautions in order to ensure that the Flosense system is only used in
safe working environment.
In case of any dysfunctions, the Flosense system must be stopped immediately and
secured. Malfunctions must be corrected immediately.
2.5. Special precautions during use of Flosense, maintenance work
and repair of malfunctions during operation and disposal
The manual prescribed settings, maintenance and service intervals and instructions for
replacement parts / equipment must always be respected. This work must only be performed
by skilled personnel.
When doing any work on the manifold that requires opening the covers, removing hoses, or
otherwise gaining access to the interior of the manifold, please ensure that you have emptied
and depressurized the manifold
2.5.1. Maintenance
Maintenance and service intervals and instructions for replacement parts / equipment must
always be respected. This work must only be performed by skilled personnel.
2.5.2. Disposal
We strongly recommend safe and environmentally conscious disposal of operating
equipment and aids as well as replacement parts!
To Next Page
Loading...
