To Next PageTo Next Page
Need help?Do you have a question about the Moultrie D-555i and is the answer not in the manual?
General| Megapixels | 5.0 MP |
|---|---|
| Flash Range | 50 ft |
| Video Resolution | 640x480 |
| Storage | SD Card (up to 32GB) |
| Flash Type | Infrared |
| Detection Range | 50 ft |
| Battery Type | AA |
Identifies external components visible on the front of the D-555i camera.
Identifies external components visible on the bottom of the D-555i camera.
Explains the function of the IR Aim switch and its effect on the camera's LED.
Details the function of the Menu Button for navigation and camera activation.
Describes the use of navigation buttons for menu interaction and manual photo capture.
Instructions for installing six C-cell alkaline batteries into the battery tray.
Information on the SD card slot capacity and its necessity for camera operation.
How to connect the camera via USB to a computer for image transfer.
Details compatible external power accessories and warranty implications.
Install batteries and SD card into the camera tray and slot.
Thread and secure the mounting strap to a tree or pole.
Turn the camera ON using the IR AIM/OFF/ON switch.
Access camera setup and set the current time and date.
Navigate menus to select the desired capture mode.
Use IR Aim and motion detection to determine the target area.
Switch camera to ON to begin automatic picture taking.
Camera takes still images when motion is detected.
Camera captures video when motion is detected.
Camera observes and records a series of still images over a day.
Combines Time Lapse and Motion Detect modes throughout the day.
Instructions for mounting the camera to a tree or pole using a bracket.
Guidance on positioning and connecting the solar power panel.
Details on extending field life using the rechargeable external power source.
Navigating the setup menu to customize camera features.
Customizing features within Motion Detect mode.
Setting the delay time between motion detection events.
Choosing between capturing photos or videos.
Selecting image resolution for photos (e.g., 8MP, 4MP).
Choosing the duration for video recordings.
Enabling or disabling audio recording for videos.
Configuring the number of photos taken per trigger event.
Accessing and setting general camera features.
Adjusting the camera's date and time settings.
Instructions for downloading and installing the Time Lapse software.
Overview of the Time Lapse software's capabilities for photo analysis.
Minimum computer specifications needed to run the Time Lapse software.
Steps to open the software and load image folders for viewing.
Procedure for safely removing the SD memory card from the camera.
Crucial reminder to turn off the camera before removing the SD card.
Methods for downloading and viewing images using external devices.
Instructions for connecting the camera to a PC for image transfer.
Information on supported SD card capacity and storage estimates.
Technical specifications for photo resolution and card capacity.
Technical specifications for video resolution and card capacity.
Enabling or disabling imprint information on images/videos.
Setting the temperature unit display (Fahrenheit or Celsius).
Assigning a unique name or identity to the camera.
Setting a 5-digit security code for camera access.
Configuring the time interval between captured images in Time Lapse mode.
Choosing the number of operating cycles within a 24-hour period.
