Need help?Do you have a question about the Mounting Systems Premium Series and is the answer not in the manual?
General| Brand | Mounting Systems |
|---|---|
| Model | Premium Series |
| Category | Construction Equipment |
| Language | English |
Instructions to fold feet and secure with ball locking pins to desired positions.
Guides installation of the front support into the base rail cutouts.
Instructions for locking the rail component with an audible click.
Instructions for placing the rear support in the cutouts.
Notes front support placement, mentioning rotation for wind deflectors.
Guides locking the rear support with the connecting rail until it clicks.
Instructions for sliding in the connecting rail until an audible click is heard.
Guides locking the components with the rear support.
Instructions for locking at the system end with a component.
Instructs to mount the adapter wind deflector on the middle support.
Notes the rotation requirement for the adapter in the 10° variant.
Illustrates the arrangement of PV modules on the structure.
Guides insertion and fixing of right and left side deflectors.
Crucial check: ensure the end clamp's bottom aligns with the side deflector.
Instructions for inserting module clamps into the rails.
Specifies tightening the module clamps with a torque wrench.
Specifies a tightening torque of 8 Nm for the middle clamps.
Guides hanging wind deflectors in openings and securing them with screws.
Instructions for locking the top rail cover after cable management.
To Next Page