1.3 Warnings
The following warnings are used in these Installation
Instructions to indicate safety-related information.
They include:
· Warning symbols (pictograms)
· Signal words which identify the hazard level
· Information about the type and source
of the hazard
· Information about the potential consequences
if the hazard is disregarded
· Measures for the prevention of hazards and the
prevention of injuries or damage to property.
The signal words of the warnings respectively
indicate one of the following hazard levels:
1.4 Safety
All universally valid safety instructions for products of
Mounting Systems GmbH are listed in the document
‘Montageanleitung für PV-Gestellsysteme: allgemeiner
Teil’ [“Installation manual for PV mounting systems –
general part”. Please read this document carefully and
observe the instructions given therein: Do not use
the product in a manner other than intended, please
comply with the obligations of the owner and observe
all general and specific safety instructions.
In addition, please observe the specific safety
instructions given in this installation manual for all
installation work. The specific safety instructions are
positioned in each case directly with the respective
installation step.
Danger!
Indicates a potentially mortal danger,
disregard for which may result in
death or serious injury.
Attention!
Indicates a potentially dangerous
situation which may result in serious
injury or damage to property.
1.5 Tools
1 Tape measure
2 String
3 Torque wrench with Allen socket
4 Measure of distance (optional)
5 Sheet metal shears
To Next Page
Loading...