Mova E20 Plus - Page 14

13
EN
Use Mopping Function
It is recommended that all floors are vacuumed at least three times before the first mopping session to achieve a better cleaning eect.
1. Fill the water tank with clean water.
1 2 31 2 3
Note:
· Do not use detergent or disinfectant.
· Do not fill the water tank with hot water as this may cause the water tank to
warp.
2. Dampen the mop pad and wring out excess water. Install the mop pad as
shown in the diagram.
1 2 31 2 3
3. Install mop assembly.
1 2 31 2 3
4. Slide the 2-in-1 water tank with dust box and mop assembly into the robot
until it clicks into place.
1 2 31 2 3
How to Use