14
EN
How to Use
5. Press the button or use the app to start cleaning.
Note:
· Do not use detergent or disinfectant.
· Do not fill the water tank with hot water as this may cause the water tank to
warp.
6. When the robot finishes a cleaning task and returns to the base station,
remove the mop assembly and wash the mop pad in time. To remove the 2-in-1
water tank with dust box, press and hold the release clip, and then take it out.
Note: When the robot is charging or not in use, it is recommended to remove
the 2-in-1 water tank with dust box and mop pad. Pour out all the remaining
water in the water tank, and clean the mop pad to prevent mildew or odors.
To Next Page
Loading...
