17
EN
Routine Maintenance
2-in-1 Water Tank with Dust Box
1. Press the release clip to remove the 2-in-1 water tank with dust box, and
then empty the water tank.
2. Open the dust box cover and empty the dust box.
3. Remove the filters and tap the HEPA filter gently.
Note: Do not attempt to clean the filters with a brush, a finger or sharp
objects to prevent damage.
4. Rinse the dust box and primary filter with water and air dry them completely
before reinstalling.
Note:
· Do not rinse the parts outside the dust box. If there are any water stains,
please wipe them dry before reinstalling.
· Rinse the dust box and primary filter with clean water only. Do not use any
detergent.
· Use the dust box and primary filter only when they are completely dry.
To Next Page
Loading...
