To Next PageTo Next PageWhat to do if Movincool Classic Plus 14 Air Conditioner does not operate?
If your Movincool Air Conditioner is not turning on, there might be a couple of reasons: * A ground fault breaker may have blown. In this case, reset the breaker. * The drain tank could be full, which is indicated by a flashing FULL TANK LED. Empty the drain tank.
Why Movincool Classic Plus 14 does not operate?
Your Movincool Air Conditioner might not be operating due to several reasons: * A tripped ground fault breaker or LCDI power cord. Try resetting the breaker or power cord. * A full drain tank. If the “TANK FULL” LED is flashing, empty the drain tank. * The high-pressure switch has activated 10 times in 24 hours. In this case: 1. Clean the air filter. 2. Check for any obstructions blocking airflow into or out of the unit. 3. Ensure the environmental conditions are within the unit's operational range. 4. Reset the controller by pressing the FAN HI/LO and COOL ON/OFF buttons simultaneously for 3 seconds.
General| Cooling Capacity | 14, 000 BTU/h |
|---|---|
| Power Supply | 115V, 60Hz |
| Refrigerant | R-410A |
| Power Consumption | 1.5 kW |
| Operating Temperature Range | 60°F to 95°F |
Defines the meaning of WARNING, CAUTION, and Note symbols used in the manual.
Covers safe electrical work, outlet requirements, extension cord use, power cord handling, and liquid contact risks.
Details on proper installation site, weight bearing, and avoiding movement or toppling.
Lists the items included in the MovinCool unit package for unpacking verification.
Guides on securing the unit on a flat surface and attaching air outlet ducts using screws.
Provides precautions for selecting a safe and appropriate location for the unit's installation.
Instructions on how to safely move the unit and lock its casters in the desired position.
Details on checking the power cord and plug condition, and requirements for the electrical outlet.
Explains how to connect external warning devices to the unit's output terminals.
Details on connecting the unit to a fire alarm control panel via input signal terminals.
Provides crucial safety information and testing procedures for the LCDI power cord.
Details the digital control panel and the information displayed on the LCD screen.
Highlights fan speeds, temperature control, safety functions like fire alarm and auto restart, and timer.
Introduces the basic controls located on the unit's control panel for operation.
Explains the functions of buttons like SET CLOCK, SET PROG, RUN/STOP, and the TANK FULL LED.
Details the various indicators on the LCD display, such as day, time, temperature, and program status.
Continues the explanation of LCD indicators for STOP, CLOCK status, FAN speed, COOL mode, and LOCKED status.
Step-by-step guide to setting the unit's internal clock for accurate timekeeping and programming.
Instructions on how to activate and control the unit's cooling function and fan speed.
Explains how to use the unit solely for air circulation without cooling.
Procedure for transitioning the unit from FAN ONLY mode to the COOL operating mode.
Detailed steps for programming start/stop times, fan speed, and temperature settings.
Instructions on how to review existing programs and remove them from the unit's memory.
Guides on activating and deactivating scheduled operating programs.
Describes COOL and FAN ONLY modes, temperature control, and DIP switch functions for fan and temperature display.
Lists diagnostic codes displayed on the LCD for troubleshooting unit malfunctions.
Step-by-step instructions for removing and emptying the condensate drain tank.
Explains the function and operation of the optional condensate pump kit for continuous drainage.
Details the optional condensate pump kit for continuous operation and drainage on the Classic Plus 26.
Covers emptying the drain tank, cleaning air filters, and methods for filter removal and cleaning.
Provides guidelines for checking the unit during operation seasons and preparing it for storage.
Lists common causes and remedies for the unit failing to start or operate.
Addresses issues related to poor cooling performance, including causes and solutions.
Covers rating conditions and general specifications like power, frequency, and voltage.
Details cooling capability, fan air volume, and compressor type and output.
Covers safety features and the environmental operating conditions for the units.
Details the physical size, weight, and control system components of the units.
Outlines what is covered by the MovinCool warranty and common exclusions.
States the limitations of the warranty and disclaims other implied warranties.
