EDS-408A/405A Series User’s Manual Featured Functions
3-3
Password
The EDS-408A/405A switch provides two levels of access privileges: admin privilege gives
read/write access to all EDS configuration parameters; user privilege provides read access only—
you will be able to view the configuration, but will not be able to make modifications.
ATTENTION
The EDS’s default Password is not set (i.e., is blank). If a Password is already set, then you will
be required to type the Password when logging into the RS-232 Console, Telnet Console, or Web
Browser interface.
Account
Setting Description Factory Default
admin admin privilege allows the user to
modify all EDS configurations.
user user privilege only allows viewing
EDS configurations.
admin
Password
Setting Description Factory Default
Old Password (Max.
16 Characters)
Type current password when changing
the password
None
New Password (Max.
16 Characters)
Type new password when changing the
password
None
Retype Password
(Max. 16 Characters)
If you type a new password in the
Password field, you will be required to
retype the password in the Retype new
password field before updating the new
password.
None
To Next Page
Loading...
Need help?
General
