EDS-408A/405A Series User’s Manual Featured Functions
3-8
Time
The Time configuration page lets users set the time, date, and other settings. An explanation of
each setting is given below the figure.
The EDS has a time calibration function based on information from an NTP server or user
specified Time and Date information. Functions such as Auto warning Email can add real-time
information to the message.
NOTE
The EDS does not have a real time clock. The user must update the Current Time and Current
Date to set the initial time for the EDS after each reboot, especially when the network does not
have an Internet connection for NTP server or there is no NTP server on the LAN.
Current Time
Setting Description Factory Default
User adjustable
time.
The time parameter allows
configuration of the local time in local
24-hour format.
None (hh:mm:ss)
Current Date
Setting Description Factory Default
User adjustable
date.
The date parameter allows
configuration of the local date in
yyyy/mm/dd format.
None (yyyy/mm/dd)
Daylight Saving Time
Daylight saving time (also know as DST or summer time) involves advancing clocks (usually 1
hour) during the summer time to provide an extra hour of daylight in the afternoon.
Start Date
Setting Description Factory Default
User adjustable
date.
The Start Date parameter allows users
to enter the date that daylight saving
time begins.
None
To Next Page
Loading...
Need help?
General
