2
2
Chapter 2 Getting Started
This chapter explains how to access MOXA EtherDevice Switch for the first time. There are three
ways to access the switch: serial console, Telnet console, and web browser. The serial console
connection method, which requires using a short serial cable to connect MOXA EtherDevice
Switch to a PC’s COM port, can be used if you do not know MOXA EtherDevice Switch’s IP
address. The Telnet console and web browser connection methods can be used to access MOXA
EtherDevice Switch over an Ethernet LAN, or over the Internet.
The following topics are covered:
Configuration using RS-232 Serial Console (115200, None, 8, 1, VT100)
Configuration using Telnet Console
Configuration using Web Browser
Disabling Telnet and Browser Access
To Next Page
Loading...
Need help?
General
