Need help?Do you have a question about the Moxa Technologies ioLogik E1213-T and is the answer not in the manual?
General| Brand | Moxa Technologies |
|---|---|
| Model | ioLogik E1213-T |
| Category | I/O Systems |
| Language | English |
Instructions for physically installing the ioLogik E1200 device.
Overview of the browser-based configuration utility.
Configuration of network settings like IP, subnet, and gateway.
Configuration and status monitoring of Digital and Analog I/O channels.
Detailed settings and modes for Digital Input channels.
Configuration options for Digital Output channels.
Settings for Analog Input channels, including modes and ranges.
Configuration of input ranges for Analog Input channels.
Settings for Analog Output channels, including modes and scaling.
Configuration and calibration for RTD temperature sensors.
Configuration and calibration for Thermocouple temperature sensors.
Setting up direct communication between ioLogik devices.
Configuring up to 50 peer-to-peer mapping rules.
Enabling and configuring the RESTful API for data access.
Enabling and configuring the EtherNet/IP protocol.
Managing device settings, firmware, and configuration.
Procedure for updating the device firmware.
Resetting all device settings to factory defaults.
Overview of the ioSearch utility for finding ioLogik devices.
Core functionalities available within ioSearch.
Steps to connect ioLogik E1200 with an Allen-Bradley PLC.
Modbus address map for ioLogik E1210.
Modbus address map for ioLogik E1211.
Modbus address map for ioLogik E1212.
Modbus address map for ioLogik E1213.
Modbus address map for ioLogik E1214.
Modbus address map for ioLogik E1240.
Modbus address map for ioLogik E1241.
Modbus address map for ioLogik E1242.
Modbus address map for ioLogik E1260.
Modbus address map for ioLogik E1262.
EtherNet/IP mapping for the ioLogik E1200 series.
RESTful API address mappings for the ioLogik E1200.
To Next Page