Need help?Do you have a question about the Moxa Technologies ioLogik E1212 and is the answer not in the manual?
Configuration of network parameters, Modbus addressing, and AOPC server settings for integration.
Comprehensive settings for all digital and analog I/O channels, including input/output modes and parameters.
Setup for direct device-to-device communication and network monitoring using SNMP.
Configuration for RESTful API and EtherNet/IP protocol for advanced integration and control.
Tools for managing firmware, configurations, passwords, and system restarts.
Details key functionalities like locating, upgrading, importing, exporting, and resetting devices using ioSearch™.
Step-by-step guide for integrating ioLogik E1200 EDS files into RSLogix 5000.
Procedures for setting up EtherNet/IP communication between ioLogik E1200 and Allen-Bradley PLCs.
Lists required firmware/utility versions, API settings, and supported methods for device interaction.
Step-by-step instructions and crucial warnings for safely updating the device firmware.
General| Cable type | AWG |
|---|---|
| Module type | Digital |
| Channel type | - |
| Signal direction | Input/output |
| Power consumption | 130 mA |
| Dimensions (WxDxH) | 27.8 x 84 x 124 mm |
| Output current range | 0 - 0.2 A |
| Ethernet LAN (RJ-45) ports | 2 |
| Supported network protocols | Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, HTTP |
| Isolation | 3 kV |
| Channels quantity | 16 channels |
To Next Page
