Need help?Do you have a question about the Moxa Technologies ioLogik E1210 and is the answer not in the manual?
General| Type | Network transmitter & receiver |
|---|---|
| Maximum transfer distance | - m |
| Mean time between failures (MTBF) | 671345 h |
| Operating temperature (T-T) | -40 - 167 °F |
| Cabling technology | 10/100Base-T(X) |
| Ethernet LAN (RJ-45) ports | 2 |
| Input current | 0.11 A |
| AC input voltage | 24 V |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Certification | FCC Part 15 Subpart B Class A, IEC 61000-4, IEC 61000-6 |
| Product color | Silver |
Weight and Dimensions| Depth | 84 mm |
|---|---|
| Width | 27.8 mm |
| Height | 124 mm |
| Weight | 200 g |
Key features and capabilities of the ioLogik E1200 series.
Detailed technical specs including LAN, physical characteristics, and environmental limits.
Details on panel layout, Ethernet port, and LED indicators for device identification.
Schematic diagrams illustrating various I/O circuit configurations like DI, DO, DIO, and Analog.
Steps for physically mounting the device, connecting power, and grounding.
Procedure for establishing network connectivity, including IP address configuration.
Guidance on installing and using the ioSearch utility for device discovery and management.
Methods to restore the device to its original factory default configuration.
Overview of the browser-based configuration utility and its navigation.
Configuration of IP address, subnet mask, gateway, and server name.
Configuration of Digital Input, Digital Output, Analog Input, and Analog Output channels.
Setup for direct device-to-device communication and channel mapping.
Managing firmware updates, system configurations, and passwords.
Description of the user interface and main features of the ioSearch utility.
Procedure for remotely updating the device firmware using ioSearch.
Modifying IP addresses for single or multiple devices via ioSearch.
Importing or exporting configuration settings for multiple devices efficiently.
Process of registering the device serial number to activate EtherNet/IP functionality.
Installing device description files for ioLogik in Rockwell's RSLogix software.
Configuring communication between ioLogik and Allen-Bradley PLC using EtherNet/IP.
Default Modbus register addresses and mappings for ioLogik E1210.
Default Modbus register addresses and mappings for ioLogik E1240.
Default EtherNet/IP data mapping for the ioLogik E1200 series.
List of default API endpoints and their descriptions for device control.
Default configuration settings for IP address, netmask, and operational parameters.
Diagrams showing terminal block pin assignments for different ioLogik models.
To Next Page
