C
C. RESTful API Default Address Mappings
ioLogik E1200 RESTful API Map
The operating parameters of http should be specified in the header.
• Accept: vdn.dac.v1
• Content Type: application/json
Supported Methods
• GET
• PUT
API List
RESTful API Name Description Access
/api/slot/0/sysInfo
/api/slot/0/sysInfo/device modelName model name read-only
/api/slot/0/sysInfo/device deviceName device name read-only
/api/slot/0/sysInfo/device deviceUpTime device up time read-only
/api/slot/0/sysInfo/device firmwareVersion firmware version read-only
/api/slot/0/sysInfo/network
/api/slot/0/sysInfo/network/
LAN
/api/slot/0/sysInfo/network/
LAN
lanMac MAC address read-only
/api/slot/0/sysInfo/network/
LAN
lanIp IP address read-only
/api/slot/0/io/di
/api/slot/0/io/di diIndex DI - index read-only
/api/slot/0/io/di diMode DI - mode (0: DI, 1: Counter) read-only
/api/slot/0/io/di diStatus DI - DI mode - status (0: OFF, 1: ON)
read-only
/api/slot/0/io/di diCounterValue DI - Counter mode - value read-only
/api/slot/0/io/di diCounterReset DI - Counter mode - reset to initial
value (1: RESET)
read-write
/api/slot/0/io/di diCounterOverflowFlag DI - Counter mode -
Normal, 1: Overflow)
read-only
/api/slot/0/io/di diCounterOverflowClear DI - Counter mode - clear overflow
flag (1: Clear)
read-write
/api/slot/0/io/di diCounterStatus DI - Counter mode - status (0: STOP,
1: START)
read-write
/api/slot/0/io/do
/api/slot/0/io/do doIndex DO - index read-only
/api/slot/0/io/do doMode DO - mode (0: DO, 1: Pulse) read-only
/api/slot/0/io/do doStatus DO - DO mode - status (0: OFF, 1:
ON)
read-write
/api/slot/0/io/do doPulseCount DO - Pulse mode - count read-write