Moxa Technologies ioLogik E1210 User Manual

ioLogik E1200 Series Using the Web Console
3-8
I/O Settings
DI Channels
The status of each DI (digital input) channel appears on the DI Channel Settings page.
You can also configure each channel’s digital input mode and parameters by clicking on the channel. DI
channels can operate in DI mode or Event Counter mode.
Activate Event Counter mode by selecting the Counter Start field and configure the Counter Trigger by
selecting Lo to Hi, Hi to Lo, or Both from the dropdown menu. When the Counter Start field is not selected,
you can still activate the counter by using Modbus commands.
NOTE
Confirm that the Counter
Filter is not set to 0; otherwise, the counter will never be activated.
Power On Settings: You may configure DI channels in Event Counter mode whether or not counting begins
when powering up.
Safe Status Settings: For DI channels in Event Counter mode, you can configure whether or not counting
starts or continues when Safe Status has been activated. When the network connection is lost, as specified in
the Host Connection Watchdog, the ioLogik E1200 will start or stop the counter according to the channel’s Safe
Status settings.

Moxa Technologies ioLogik E1210 Specifications

General

Type	Network transmitter & receiver
Maximum transfer distance	- m
Mean time between failures (MTBF)	671345 h
Operating temperature (T-T)	-40 - 167 °F
Cabling technology	10/100Base-T(X)
Ethernet LAN (RJ-45) ports	2
Input current	0.11 A
AC input voltage	24 V
Storage temperature (T-T)	-40 - 85 °C
Operating relative humidity (H-H)	5 - 95 %
Certification	FCC Part 15 Subpart B Class A, IEC 61000-4, IEC 61000-6
Product color	Silver

Weight and Dimensions

Depth	84 mm
Width	27.8 mm
Height	124 mm
Weight	200 g