Need help?Do you have a question about the Moxa Technologies ioLogik E1240 and is the answer not in the manual?
General| Type | Network transmitter & receiver |
|---|---|
| Maximum transfer distance | - m |
| Mean time between failures (MTBF) | 474053 h |
| Operating temperature (T-T) | -40 - 167 °F |
| Cabling technology | 10/100Base-T(X) |
| Ethernet LAN (RJ-45) ports | 2 |
| Input current | 0.121 A |
| AC input voltage | 12-24 V |
| Operating altitude | 0 - 2000 m |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Certification | UL/cUL Class I Division 2, ATEX Zone |
| Product color | Silver |
Weight and Dimensions| Depth | 84 mm |
|---|---|
| Width | 27.8 mm |
| Height | 124 mm |
Provides a reference guide to the hardware components and indicators of the ioLogik E1200.
Covers the essential steps for physically installing the ioLogik E1200 unit.
Details how to configure network parameters like IP address, subnet mask, and gateway.
Explains how to configure user-defined or default Modbus addresses for I/O mapping.
Covers configuration for Digital Input, Digital Output, Analog Input, and RTD/TC channels.
Details the configuration of peer-to-peer communication rules and safe mode settings.
Covers enabling and configuring RESTful API and EtherNet/IP protocols.
Details system maintenance tasks including firmware updates and configuration backup/restore.
Covers changing the device password and restoring factory default configurations.
Covers key operations like locating devices, firmware upgrades, and IP address management.
Step-by-step guide for installing ioLogik E1200 EDS files into Rockwell Software RSLogix 5000.
Procedure for establishing communication between ioLogik E1200 and an Allen-Bradley PLC.
Details the necessary prerequisites and settings for enabling and using the RESTful API.
To Next Page
