Need help?Do you have a question about the Moxa Technologies ioLogik E2210 and is the answer not in the manual?
General| Model | ioLogik E2210 |
|---|---|
| Manufacturer | Moxa Technologies |
| Category | I/O Systems |
| Digital Inputs | 8 |
| Digital Outputs | 8 |
| Input Type | Dry Contact |
| Max Output Current per Channel | 0.5 A |
| Ethernet Ports | 2 |
| Communication Interface | Ethernet |
| Power Supply | 12 to 48 VDC |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Mounting | DIN-Rail |
| Protocols | Modbus TCP, EtherNet/IP |
| Operating Temperature | -40 to 75 °C |
| Humidity | 5 to 95% (non-condensing) |
| Certifications | CE, FCC, UL |
| Digital Outputs Type | Sink |
| Output Type | Transistor |
Covers connecting power, grounding, network, and RS-485 settings.
Describes installing the ioAdmin utility.
Admin access, network, firmware, and watchdog configuration.
Interface for logic programming.
DI/DO channel settings and IP access control.
Introduction to logic programming.
Defining rule conditions and actions.
Setting up direct I/O communication.
List of default settings.
To Next Page