Need help?Do you have a question about the Moxa Technologies ioLogik 2542 and is the answer not in the manual?
General| Product Name | ioLogik 2542 |
|---|---|
| Manufacturer | Moxa Technologies |
| Category | I/O Systems |
| Digital Input Type | Dry Contact |
| Digital Output Type | Relay |
| Ethernet Ports | 2 |
| Power Input | 12 to 48 VDC |
| Storage Temperature | -40 to 85 °C |
| Protection | IP30 |
| Mounting | DIN-Rail |
| Protocols | Modbus TCP, MQTT |
| Operating Temperature | -40 to 75°C |
| Humidity | 5 to 95% (non-condensing) |
Provides an overview of the ioLogik 2500, covering its appearance, features, and specifications.
Details common, ioLogik 2512, and ioLogik 2542 Ethernet series specifications.
Details common, ioLogik 2512, and ioLogik 2542 Cellular/WLAN series specifications.
Instructions for physically installing the ioLogik 2500, including DIN rail mounting.
Procedures for powering on, grounding, and installing microSD/SIM cards.
Illustrates I/O wiring for various channels and explains LED indicators.
Covers Ethernet communication, TCP/IP settings, and serial communication.
Guide to installing the IOxpress configuration and management utility.
Describes the main screen, including its areas and menu bar.
Explains Configuration Library and Device Library for offline and online setup.
Saving configurations as projects, adding devices, and duplicating configurations.
Covers System, Security, Services, Network, and I/O configuration.
Details Data Logging, FTP, Click&Go Plus, and Peer-to-Peer configurations.
Overview of online device management capabilities in IOxpress.
Methods for searching devices via LAN, WAN, and CDA.
Updating configuration, firmware, setting date/time, and restarting devices.
Accessing device status, I/O status, and performing upgrades/resets.
Configuring network interface, modes, and connection types.
Setting up VPN connections and configuring cellular reconnection.
Configuring port forwarding and Dynamic DNS for network access.
Steps for setting up and testing the wireless LAN device.
Configuring RF type, SSID, security modes, and advanced settings.
Default Modbus addresses and register map for ioLogik 2512 series.
Default Modbus addresses and register map for ioLogik 2542 series.
To Next Page
