Moxa Technologies ioLogik 2542 User Manual

ioLogik 2500 Series Overview
1-6
ioLogik 2542 Ethernet Specifications
Inputs and Outputs
Configurable DIOs
(by software): 12 channels
Analog Inputs:
4 channels
Isolation:
3k VDC or 2k Vrms
Digital Input
Sensor Type:
Wet Contact (NPN or PNP) and Dry Contact
I/O Mode:
DI or Event Counter
Dry Contact:
• On: short to GND
• Off: open
Wet Contact (DI to
COM):
• On: 10 to 30 VDC
• Off: 0 to 3 VDC
Common Type:
6 points per COM
Counter Frequency:
2.5 kHz
Digital Filtering Time Interval:
Software configurable
Digital Output
Type:
Sink
I/O Mode:
DO or Pulse Output
Pulse Output Frequency:
5 kHz
Over
-Voltage Protection: 45 VDC
Over
-Current Protection: 1.5 A per channel @ 25°C
Over
-Temperature Shutdown: 175°C (min.)
Current Rating:
500 mA per channel @ 25°C
DIO Output Leakage Current:
< 1 mA @ 30 VDC
Analog Input
Type:
Differential input
Resolution:
16 bits
I/O Mode:
Voltage / Current (software selectable)
Input Range:
±10 V, 0 to 10 V, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA (burnout detection)
Accuracy:
• ±0.1% FSR @ 25°C
• ±0.3% FSR @
-10 and 60°C
• ±0.5% FSR @
-30 and 70°C
Sampling Rate
:
• All channels: 400 samples/sec
• Per channel: 100 samples/sec
Input Impedance:
1 mega-ohm (min.)
Built
-in Resistor for Current Input: 120 ohms
Power Requirements
Input Voltage:
9 to 48 VDC
Input Current:
358 mA @ 24 VDC
MTBF (mean time between failures)
Time:
375,439 hrs
Standard:
Telcordia SR332

Moxa Technologies ioLogik 2542 Specifications

General

Brand	Moxa Technologies
Model	ioLogik 2542
Category	I/O Systems
Language	English