Need help?Do you have a question about the Moxa Technologies ioLogik E1260 and is the answer not in the manual?
General| Type | Network transmitter & receiver |
|---|---|
| Maximum transfer distance | - m |
| Mean time between failures (MTBF) | 660260 h |
| Certification | UL/cUL Class I Division 2, ATEX Zone 2 |
| Product color | Silver |
| LED indicators | Yes |
| Operating temperature (T-T) | -40 - 167 °F |
| Cabling technology | 10/100Base-T(X) |
| Ethernet LAN (RJ-45) ports | 2 |
| Input current | 0.110 A |
| AC input voltage | 24 V |
| Operating altitude | 0 - 2000 m |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Depth | 84 mm |
|---|---|
| Width | 27.8 mm |
| Height | 124 mm |
| Weight | 200 g |
Lists key features of the ioLogik E1200 series.
Explains the hardware components like panel guide, Ethernet port, and LEDs.
Covers safety precautions and mounting procedures for the ioLogik E1200.
Details jumper settings for different ioLogik E1200 models and I/O configurations.
Provides wiring guides for various I/O types like DI, DO, and AI.
Guide to downloading, installing, and using the ioSearch utility.
Covers general settings and Ethernet configuration for the web console.
Configuration options for Digital Input (DI) channels.
Configuration options for Digital Output (DO) channels, including Pulse Output.
Configuration for Analog Input (AI) channels, including modes and ranges.
Configuration and calibration for Resistance Temperature Detector (RTD) channels.
Configuration and calibration for Thermocouple (TC) channels.
Explains setting up direct communication between ioLogik devices.
Overview of the ioSearch utility for locating ioLogik devices.
How to modify the IP address of one or multiple ioLogik devices.
How to configure TCP/IP settings for multiple devices simultaneously.
Steps to activate the EtherNet/IP function on ioLogik devices.
Assigns the license file folder for activating EtherNet/IP.
Registers the device serial number on the Moxa licensing server.
Activates the EtherNet/IP function using the ioSearch utility.
Installs the EDS files for ioLogik E1200 in RSLogix 5000 for Allen-Bradley PLC integration.
Details the steps to establish communication between the devices.
Steps to configure RESTful API settings, including header information.
Demonstrates how to use a web service to GET and PUT data with RESTful API.
Explains the correct sequence for upgrading or downgrading firmware.
To Next Page
