Moxa Technologies ioLogik E1260 User Manual

2
2. Initial Setup
This chapter describes how to install the ioLogik E1200.
The following topics are covered in this chapter:

Hardware Installation
 Mounting
 Grounding the Unit
 I/O Channel Jumper Setting
 I/O Wiring
 Communication Port Wiring
 Use the Cable Tie Base to Securely Route a Connected I/O Cable
 Powering Up the Unit

ioSearch™ Installation

Load Factory Default Settings

Moxa Technologies ioLogik E1260 Specifications

General

Type	Network transmitter & receiver
Maximum transfer distance	- m
Mean time between failures (MTBF)	660260 h
Certification	UL/cUL Class I Division 2, ATEX Zone 2
Product color	Silver
LED indicators	Yes
Operating temperature (T-T)	-40 - 167 °F
Cabling technology	10/100Base-T(X)
Ethernet LAN (RJ-45) ports	2
Input current	0.110 A
AC input voltage	24 V
Operating altitude	0 - 2000 m
Storage temperature (T-T)	-40 - 85 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	84 mm
Width	27.8 mm
Height	124 mm
Weight	200 g