Moxa Technologies ioLogik E1260 User Manual

E
E. Factory Default Settings
ioLogik E1200 series products are configured with the following factory default settings:
Default IP address 192.168.127.254
Default Netmask 255.255.255.0
Default Gateway
0.0.0.0
Communication watchdog Disable
Modbus/TCP Alive Check On
Modbus/TCP Timeout Interval 60 sec
DI Mode DI
Filter time 100 ms
Trigger for counter Lo to Hi
Counter status Stop
DO Mode DO
DO Safe Status Disable
Power on status Disable
Low width for pulse 1 ms (1.5 s for relay)
Hi width for pulse 1 ms (1.5 s for relay)
Output pulses 0 (continuous)
DIO Mode DO
AI Mode Voltage
Scaling and Slop-Intercept Disable
Password N/A
Server Name
N/A
Server Location N/A
AO Mode Voltage
Scaling Disable

Moxa Technologies ioLogik E1260 Specifications

General

Type	Network transmitter & receiver
Maximum transfer distance	- m
Mean time between failures (MTBF)	660260 h
Certification	UL/cUL Class I Division 2, ATEX Zone 2
Product color	Silver
LED indicators	Yes
Operating temperature (T-T)	-40 - 167 °F
Cabling technology	10/100Base-T(X)
Ethernet LAN (RJ-45) ports	2
Input current	0.110 A
AC input voltage	24 V
Operating altitude	0 - 2000 m
Storage temperature (T-T)	-40 - 85 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	84 mm
Width	27.8 mm
Height	124 mm
Weight	200 g