Need help?Do you have a question about the Moxa Technologies ioLogik E1242 and is the answer not in the manual?
General| Type | Network transmitter & receiver |
|---|---|
| Maximum transfer distance | - m |
| Mean time between failures (MTBF) | 502210 h |
| Certification | UL/cUL Class I Division 2, ATEX Zone 2 |
| Product color | Silver |
| LED indicators | Yes |
| Operating temperature (T-T) | -40 - 167 °F |
| Cabling technology | 10/100Base-T(X) |
| Ethernet LAN (RJ-45) ports | 2 |
| Input current | 0.139 A |
| AC input voltage | 24 V |
| Operating altitude | 0 - 2000 m |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Depth | 84 mm |
|---|---|
| Width | 27.8 mm |
| Height | 124 mm |
| Weight | 200 g |
Guides users through the physical installation of the ioLogik E1200, including safety precautions.
Provides instructions and warnings for powering up the ioLogik E1200 unit.
Introduces the ioLogik E1200's web-based configuration utility and how to access it.
Describes the Overview page, which displays basic information and current I/O status.
Covers configuring General Settings and Ethernet Configuration for the web console.
Explains how to configure custom Modbus addresses and view default mappings.
Covers configuration for DI, DO, AI, AO, RTD, and TC channels.
Details configuration for Digital Input channels, including DI and Event Counter modes.
Explains how to configure Digital Output channels, including Pulse Output mode.
Details configuration for Analog Input channels, including Voltage and Current modes.
Configures input ranges for Analog Input channels in Voltage and Current modes.
Covers configuration for Analog Output channels, including Voltage and Current modes.
Details configuration and calibration for Resistance Temperature Detector (RTD) channels.
Explains configuration and calibration for Thermocouple (TC) channels.
Explains how to set up peer-to-peer communication rules between ioLogik devices.
Configures up to 50 peer-to-peer mapping rules for direct device communication.
Configures behavior for Digital Output channels during peer-to-peer connection loss.
Configures behavior for Analog Output channels during peer-to-peer connection loss.
Covers enabling and configuring SNMP settings, including traps.
Covers network connection, firmware updates, configuration import/export, password change, and defaults.
Guides users on how to load new or updated firmware onto the ioLogik.
Describes how to import configuration settings from a file to duplicate settings between servers.
Explains how to export the ioLogik's configuration file for backup or import.
Details how to change or remove the device's password protection.
Introduces the ioSearch™ utility for searching and locating ioLogik E1200 units.
Guides on performing remote firmware upgrades for ioLogik E1200 devices.
Allows direct modification of IP addresses for one or multiple ioLogik E1200 devices.
Enables batch modification of IP addresses, subnet masks, and gateways for multiple devices.
Uses ioSearch™ to activate the EtherNet/IP function on connected ioLogik E1200 devices.
Guides on installing ioLogik E1200 EDS files into Rockwell Software RSLogix 5000.
Details the process of establishing communication between ioLogik E1200 and Allen-Bradley PLCs.
Provides step-by-step instructions for using a web service to GET and PUT data with RESTful API.
To Next Page
