Moxa Technologies ioLogik 2542 User Manual

ioLogik 2500 Series Overview
1-5
Standards and Certifications
Safety:
UL 508
EMC:
EN 61000-6-2/6-4
EMI:
CISPR 32, FCC Part 15B Class A
EMS:
IEC 61000
-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000
-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000
-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
IEC 61000
-4-5 Surge: Power: 1 kV
IEC 61000
-4-6 CS: 3 V
IEC 61000
-4-8
Hazardous Location:
Class 1 Division 2; ATEX Zone 2
Green Product:
RoHS, CRoHS, WEEE
Note: Please check Moxa’s website for the most up
-to-date certification status.
Warranty
Warranty Period:
5 years
Details: See www.moxa.com/warranty
ioLogik 2512 Ethernet Specifications
Inputs and Outputs
Digital Inputs:
8 channels
Configurable DIOs (by software): 8 channels
Isolation:
3k VDC or 2k Vrms
Digital Input
Sensor Type:
Wet Contact (NPN or PNP) and Dry Contact
I/O Mode:
DI or Event Counter
Dry Contact:
•
On: short to GND
• Off: open
Wet Contact (DI to COM):
• On: 10 to 30 VDC
• Off: 0 to 3 VDC
Common Type:
8 points per COM
Counter Frequency:
2.5 kHz
Digital Filtering Time Interval:
Software configurable
Digital Output
Type:
Sink
I/O Mode: DO or Pulse Output
Pulse Output Frequency:
5 kHz
Over
-Voltage Protection: 45 VDC
Over
-Current Protection: 1.5 A per channel @ 25°C
Over
-Temperature Shutdown: 175°C (min.)
Current Rating: 500 mA per channel @ 25°C
DIO Output Leakage Current:
< 1 mA @ 30 VDC
Power Requirements
Input Voltage:
9 to 48 VDC
Input Current:
274 mA @ 24 VDC
MTBF (mean time between failures)
Time:
467,032 hrs
Standard:
Telcordia SR332

Moxa Technologies ioLogik 2542 Specifications

General

Brand	Moxa Technologies
Model	ioLogik 2542
Category	I/O Systems
Language	English