D
D
Appendix D. SNMP MIB II
RFC1213 MIB II Supported SNMP Variables
MOXA provides an SNMP to I/O MIB file that can help you monitor I/O status with SNMP software.
You can find the MIB file on the CDROM.
System MIB
SysDescr SysObjectID SysUpTime SysContact
SysName SysLocation
Interfaces MIB
ifAdminStatus ifInOctets ifOperStatus ifOutUcastPkts
ifDescr ifInUcastPkts ifOutDiscards ifPhysAddress
ifIndex ifInUnknownProtos ifOutErrors ifSpecific
ifInDiscards ifLastChange ifOutNUcastPkts ifSpeed
ifInErrors ifMtu ifOutOctets ifType
ifInNUcastPkts ifNumber ifOutQLen
IP MIB
ipAdEntAddr ipFragOKs IpNetToMediaType ipRouteIfIndex
ipAdEntBcastAddr ipInAddrErrors ipOutDiscards ipRouteInfo
ipAdEntIfIndex ipInDelivers ipOutNoRoutes ipRouteMask
ipAdEntNetMask ipInDiscards ipOutRequests ipRouteMetric1
ipAdEntReasmMaxSize ipInHdrErrors ipReasmFails ipRouteMetric2
ipDefaultTTL ipInreceives ipReasmOKs ipRouteMetric3
ipForwarding ipInUnknownProtos ipReasmReqds ipRouteMetric4
ipForwDatagrams IpNetToMediaIfIndex ipReasmTimeout ipRouteMetric5
ipFragCreates
IpNetToMediaNetAddre
ipRouteAge ipRouteNextHop
ipFragFails
IpNetToMediaPhysAddr
ipRouteDest ipRouteProto
ipRouteType
To Next Page
Loading...
Need help?
General
