ioLogik E2210 User’s Manual Using the Web Console
4-7
SNMP Agent
On the SNMP Agent page, you may enable SNMP and set the read and write community strings. The
ioLogik E2210 provides SNMP v2 (Simple Network Management Protocol) to allow monitoring of
network and I/O devices with SNMP Network Management software. It is useful in building automation
and telecom applications.
Network Connection
On the Network Connection page, you may view the TCP connections from other hosts. This may assist
you in the management of your devices.
LCM
If you have installed the optional LCM, you may view the status and firmware details on the LCM page.