Moxa Technologies ioLogik E1210 - Iologik E1240; Iologik E1241

ioLogik E1200 Series Introduction
1-9
ioLogik E1240
Inputs and Outputs
Analog Inputs:
8 channels
Isolation:
3k VDC or 2k Vrms
Analog Input
Type:
Differential input
Resolution:
16 bits
I/O Mode:
Voltage / Current (jumper selectable)
Input Range:
0 to 10 VDC, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA (burnout detection)
Accuracy:
±0.1% FSR @ 25°C
±0.3% FSR @
-10 and 60°C
±0.5% FSR @
-40 and 75°C
Sampling Rate:
• All channels: 12 samples/sec
• Per
channel: 1.5 samples/sec
• Only one channel enabled: 12 samples/sec
Input Impedance:
10 mega-ohms (min.)
Built
-in Resistor for Current Input: 120 ohms
Power Requirements
Input Voltage:
12 to 36 VDC
Input Current:
121 mA @ 24 VDC
MTBF
(mean time between failures)
Time:
474,053 hrs
Standard:
Telcordia SR332
ioLogik E1241
Inputs and Outputs
Analog Outputs:
4 channels
Isolation:
3k VDC or 2k Vrms
Analog Output
Resolution:
12 bits
Output Range:
0 to 10 VDC, 4 to 20 mA
Drive Voltage:
10 mA (max.)
Accuracy:
±0.1% FSR @ 25°C
±0.3% FSR @
-40 and 75°C
Load Resistor:
Internal register, 400 ohms
Note: 24 V of external power required when loading exceeds 1000 ohms.
Power Requirements
Input Voltage:
12 to 36 VDC
Input Current:
194 mA @ 24 VDC
MTBF (mean time between failures)
Time:
888,656 hrs
Standard:
Telcordia SR332