Moxa Technologies ioLogik E1210 User Manual

3
3. Using the Web Console
The ioLogik E1200’s main configuration and management utility is the built-in web console, which can be used
to configure a wide range of options.
The following topics are covered in this chapter:

Introduction to the Web Console

Overview

Network Settings for the Web Console
 General Settings
 Ethernet Configuration

User-Defined Modbus Addressing
 Default Modbus Address

AOPC Server Settings
 Tag Generation

I/O Settings
 DI Channels
 DO Channels
 AI Channels
 AI Input Range
 AO Channels
 RTD Channels
 TC Channels

Peer-to-Peer Networking
 Peer-to-Peer Settings (1-50)
 Sample Peer-to-Peer Configuration
 DO Safe Mode Settings
 AO Safe Mode Settings

SNMP
 SNMP Trap
 Using SNMP
 Accessibility IP List

RESTful API Setting

EtherNet/IP Setting

System Management
 Network Connection
 Firmware Update
 Import System Configuration Settings
 Export System Settings

Change Password

Load Factory Defaults

Save/Restart

Moxa Technologies ioLogik E1210 Specifications

General

Type	Network transmitter & receiver
Maximum transfer distance	- m
Mean time between failures (MTBF)	671345 h
Operating temperature (T-T)	-40 - 167 °F
Cabling technology	10/100Base-T(X)
Ethernet LAN (RJ-45) ports	2
Input current	0.11 A
AC input voltage	24 V
Storage temperature (T-T)	-40 - 85 °C
Operating relative humidity (H-H)	5 - 95 %
Certification	FCC Part 15 Subpart B Class A, IEC 61000-4, IEC 61000-6
Product color	Silver

Weight and Dimensions

Depth	84 mm
Width	27.8 mm
Height	124 mm
Weight	200 g