ioLogik E1200 Series Introduction
Product Specifications
Common Specifications
2 switched 10/100 Mbps RJ45 ports
1.5 kV magnetic isolation
Modbus/TCP (Slave), EtherNet/IP, SNMPv1/v2c, RESTful API, TCP/IP, UDP, DHCP, BOOTP, HTTP
I/O cable max. 14 AWG
27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
Under 200 g (0.44 lb)
DIN rail or wall
-10 to 60°C (14 to 140°F)
-40 to 75°C (-40 to 167°F)
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity:
5 to 95% (non-condensing)
IEC 60068-2-27
IEC 60068-2-6
Up to 2000 m
Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
Standards and Certifications
UL 508
EN 55022, EN 55024
CISPR 22, FCC Part 15B Class A
-4-2 ESD: Contact: 4 kV; Air: 8 kV
-4-3 RS: 80 MHz to 1 GHz: 3 V/m
-4-4 EFT: Power: 2 kV; Signal: 1 kV
-4-5 Surge: Power: 2 kV; Signal: 1 kV
-4-6 CS: 10 V
-4-8
Class 1 Division 2, ATEX Zone 2
RoHS, CRoHS, WEEE
Note: Please check Moxa’s website for the most up
-to-date certification status.
5 years (excluding the ioLogik E1214)
See www.moxa.com/warranty
Note: Because of the limited lifetime of power relays, products that
use this component are covered by a 2-