Moxa Technologies ioLogik E1212 User Manual

ioLogik E1200 Series How to Connect the ioLogik E1200 to an Allen-Bradley PLC
6-2
EDS Installation of the ioLogik E1200 Series in
Rockwell Software RSLogix 5000
1. Start the RSLogix 5000 and open the EDS Hardware Installation Tool in Tools

EDS Hardware
Installation Tool.
2. The wizard will start and the following window will pop out, click Next and then select Register an EDS
file(s), followed by Next.

Moxa Technologies ioLogik E1212 Specifications

General

Cable type	AWG
Module type	Digital
Channel type	-
Signal direction	Input/output
Power consumption	130 mA
Dimensions (WxDxH)	27.8 x 84 x 124 mm
Output current range	0 - 0.2 A
Ethernet LAN (RJ-45) ports	2
Supported network protocols	Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, HTTP
Isolation	3 kV
Channels quantity	16 channels