1
www.moxa.com
info@moxa.com
Industrial I/O
ioLogik E1200 Series
Introduction
Star-topology for Ethernet Automation
Ethernet requires infrastructure equipment such as switches for
connecting a variety of different devices to the network. This is
unlike most field-bus automation networks that use a daisy-chain
topology, which presents a bit of a problem for Ethernet automation
applications since when connecting to Ethernet, meters and gauges
Remote Ethernet I/O with 2-port Ethernet Switch
Built-in 2-port Ethernet switch for daisy-chain topologies ›
Free support of Moxa’s push-based Active OPC Server Lite ›
Seamlessly connect to any SCADA system ·
Save 80% on network bandwidth ·
I/O response that’s seven times faster ·
User-defined Modbus/TCP addressing ›
MXIO programming library for Windows and WinCE VB/VC.NET ›
and Linux C APIs
Web configuration with Import/Export function ›
must be formed in a “star” configuration. The ioLogik E1200 series
provides an alternative to spending the time and money needed to
figure out the best way to hook up your Ethernet switches. Since each
E1200 unit has two built-in Ethernet switches, the E1200 solution is
tailor-made for a daisy-chain type configuration.
To Next Page
Need help?
General
