Moxa Technologies ioLogik E1213-T - EDS Installation in Rockwell Software RSLogix 5000

ioLogik E1200 Series How to Connect the ioLogik E1200 to an Allen-Bradley PLC
6-2
EDS Installation of the ioLogik E1200 Series in
Rockwell Software RSLogix 5000
1. Start the RSLogix 5000 and open the EDS Hardware Installation Tool in Tools

EDS Hardware
Installation Tool.
2. The wizard will start and the following window will pop out, click Next and then select Register an EDS
file(s), followed by Next.