MGate MB3000 Modbus Gateway User Manual
When you click OK, MGate Manager will immediately reflect your chosen language.
ATTENTION
Use Default Language before contacting Moxa Technical Support.
With support for multiple languages, MGate Manager is more user-friendly and accessible. However, if you
need assistance from Moxa Technical Support, please change the language to Default Language. This will
prevent any misunderstandings or confusion about MGate Manager menu items and commands as our
engineers assist you.
The default language is English and will only be active for the current MGate Manager session. When you
open MGate Manager again, the language will revert to your original setting.
Connecting to the Unit
MGate Manager needs to connect to the unit before the unit can be configured. There are two methods to
connect to the unit. Broadcast Search is used to find every MGate MB3000 on the LAN. Search by IP
attempts to connect to a specific unit by IP address, which is useful if the unit is located outside the LAN or
can only be accessed by going through a router.
Except for the Broadcast Search feature, you can also use the Device Search Utility (DSU) to detect MGate
gateways on your network, which can be downloaded from Moxa's website at http://www.moxa.com. This
utility can further support multiple gateways configuration to ease your job.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
