Moxa Technologies MGate MB3180 User Manual

MGate MB3000 Modbus Gateway User Manual
76
Load Default
To clear all the settings on the unit, use the Load Default button to reset the unit to its initial factory
default values.
Click Load Default and review the confirmation message. If you are sure you would like to reset the
configuration to factory defaults, click the OK button. If not, click Cancel.
After the MGate Manager resets completely, MGate Manager will automatically execute a Broadcast Search
for all MGate units on the LAN. Your MGate should reappear in the list of units.
ATTENTION
Load Default will completely reset the configuration of the unit, and all of the parameters you have saved
will be discarded. Do not use this function unless you are sure you want to completely reset your unit.

Moxa Technologies MGate MB3180 Specifications

General

Full duplex	Yes
Data transfer rate	0.1 Gbit/s
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 55 °C
Operating relative humidity (H-H)	5 - 95 %
Interface	RS-232/422/485, RJ45
Safety	UL 60950-1, EN 60950-1
Certification	EN 55024, \\r EN 61000-4-2 (ESD) Level 2, \\r EN 61000-4-3 (RS) Level 2, \\r EN 61000-4-4 (EFT) Level 2, \\r EN 61000-4-5 (Surge) Level 2, \\r EN 61000-4-6 (CS) Level 2, \\r EN 61000-4-8, \\r EN 61000-4-11, \\r EN 61000-4-12
LED indicators	Power
Compatible operating systems	Windows 98/ME/NT/2000, Windows XP/2003/Vista/2008/7 x86/x64

Weight and Dimensions

Weight	340 g