NPort 5000 Series User Manual
4. Refer to Chapter 2 for each parameter’s function definition. To modify the configuration, you must first
click in the modify box to activate the parameter setting box.
ATTENTION
You can simultaneously modify the configurations of multiple NPort units that are of the same model. To
select multiple NPort units, hold down the Ctrl key when selecting additional NPort units, or hold down the
Shift key to select a group of NPort units.
Upgrading the Firmware
Follow these steps to upgrade the firmware of an NPort.
1. To start NPort Administrator, click Start > NPort Administration Suite > NPort Administrator.
To Next Page
Loading...
Need help?
General
