Moxa Technologies UPort 1200 Series User Manual

UPort 1200/1400/1600 Series Driver Installation
2-29
7. Open “Build”, select “Advanced Build Commands” and “Build Sysgen”. This operation will take you a
few minutes.
8. After building sysgen, select “Build” and “Make Run-Time Image” to create the WinCE OS image. Finally,
copy your image file to the target Host.
9. Configure the interface on the target device using the configuration tool found in “Start

Programs

MOXA UP Configuration Panel\UPort Configuration Utility”.

Moxa Technologies UPort 1200 Series Specifications

General

Brand	Moxa Technologies
Model	UPort 1200 Series
Category	Media Converter
Language	English