13
Combines with the fine adjustment of the CRB7
to improve router control and offer greater edge
to rebate range.
13/32” (10mm) GUIDE ROD PAIR
For routers bases with 13/32” rod drillings.
EDGE GUIDE PARALLEL SIDE FENCE
15/32” (12mm) GUIDE ROD PAIR
For router bases with 15/32” rod drillings.
MAINTENANCE
The accessory has been designed to operate
over a long period of time, with the minimum
amount of maintenance. Continual satisfactory
operation depends upon proper tool care and
regular cleaning.
Cleaning
• Regularly clean jig with a soft cloth.
Lubrication
• The CRB7 requires no additional lubrication.
Storage
• The CRB7 can be stored in its packaging, or
can be hung on a wall hook.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing as
waste.
Packaging should be sorted for environmental
friendly recycling.
The product and its accessories at the end of its
life should be sorted for environmental-friendly
recycling.
GUARANTEE
All MPOWER products are guaranteed against
any defects in either workmanship or material,
except products that have been damaged due to
improper use or maintenance.
Our policy of continuous improvement means
that specifications may change without notice.
MPOWER Tools Limited cannot be held liable for
any material rendered unusable, or for any form
of consequential loss.
CRB7 ACCESSORIES
Please only use MPOWER original accessories.
MORTISE, HINGE, LOCK & FLUTE
The solution to the serious issue of controlled
cutter access into the edge of a board.
Cutting Mortises, Hinges, Lock Rebates and
Fluting is now safer, quicker and more accurate
than before.
EDGING AND DOWEL TRIM KIT
A fast and accurate method of consistently
trimming solid hardwood and iron on edging
flush to its core panel. The kit can also be used
to trim off the excess wood when using dowel
plugs.
To Next Page
Loading...