MPP Solar PIP-MS 1-5KVA User Manual

15
10A (Not available
for 2-3KVA 24V Plus)
20A
30A
40A
50A
60A (default)
Available options in 4K/5K model
70A
80A
90A
100A
110A 120A
03 AC input voltage range
Appliances (de
fault)
If selected, acceptable AC input
voltage range will be within
90-280VAC.
UPS
If selected, acceptable AC input
voltage range will be within
170-280VAC.
04
Power saving mode
enable/disable
Saving mode disable
(default)
If disabled, no matter connected load
is low or high, the on/off status of
inverter output will not be effected.
Saving mode enable
If enabled, the output of inverter will
be off when connected load is pretty
low or not detected.
05 Battery type
AGM
(default)
Flooded
User-Defined If “User-Defined” is selected, battery
charge voltage and low DC cut-off
voltage can be set up in program 26,
27 and 29.
06
Auto restart when overload
occurs
Restart disable
(default)
Restart enable

MPP Solar PIP-MS 1-5KVA Specifications

General

Brand	MPP Solar
Model	PIP-MS 1-5KVA
Category	Inverter
Language	English