MPPT SR4810 User Manual

Error code Description
Suggestion
101
102
EEPROM fault
Remote communicate fault
1.Restart the solar charge controller.
2.IF erroe message still exists,contact Sumry.
1.Restart the solar charge controller.
2.IF erroe message still exists,contact Sumry.
103
Input PV voltage too low
1.Please check the PV voltage.
2.If the PV normal,restart the solar charge
controller.
3.If erroe message still exists,contact Sumry.
104
Input PV voltage too high
1.Please check the PV voltage.
2.If the PV normal,restart the solar charge
controller.
3.If erroe message still exists,contact Sumry.
105
Battery voltage too low
106
Battery voltage too high
1.Please check the battery voltage.
2.If the battery normal,restart the solar charge
controller.
3.If error message still exists,contact Sumry.
1.Please check the battery voltage.
2.If the battery normal,restart the solar charge
controller.
3.If error message still exists,contact Sumry.
107
Charging overflow
1.Restart the solar charge controller.
2.If error message still exists,contace Sumry.
108
Load overflow
1.Restart the solar charge controller.
2.If error message still exists,contace Sumry.
109
Battery temperature
too high
2.Restart the solar charge controller.
3.If error message still exists,contace Sumry.
1.Check actual battery temperature.
110
Heat sink temperture
too high
1.Restart the solar charge controller.
2.If error message still exists,contace Sumry.
115
Load short circuit
1.Restart the solar charge controller.
2.If error message still exists,contace Sumry.
22

MPPT SR4810 Specifications

General

Brand	MPPT
Model	SR4810
Category	Controller
Language	English