TEMPO
®
/ TEMPO/PLUS
®
/ TEMPO/REMOTE
®
/ TEMPO/EXT
®
• Owner’s Manual
18
TEMPO
®
/ TEMPO/PLUS
®
/ TEMPO/REMOTE
®
/ TEMPO/EXT
®
• Owner’s Manual 19
Battery Replacement
Your remote control is powered by two AAA batteries.
Note: Before you start it’s important to note that you have only 3 minutes to change batteries
if you want to retain codes recorded in the memory!
1• Unscrew and remove bottom cap.
Note: You can use a coin to unscrew cap.
2• Insert new batteries, making sure to match
plus (+) ends with the plus markings on
the battery case.
3• Replace cap ensuring that waterproof
gaskets are in position.
After replacing batteries:
LED indicator will ash twice indicating that
programmed codes are still in memory.
If LED indicator ashes 3 times, it means that
programmed code settings have been erased,
re-enter the code per instructions on page 15.
+
-
Cap
To Next Page
Loading...
Need help?
General