MSA DR-209M - Page 19

Universal digital repeater
DR-209M
Page 19
Table 9 – Controls of tab page Filters the input data
Name
Function
ОК
To confirm the select
Apply
To apply (save) the selected settings
Cancel
To cancel the selected settings
Yes
To confirm the filter deletion
No
To refuse the filter deletion
Cancel
To cancel the filter deletion
To add a filter
To delete all filters
To delete the selected filter
Time zone parameter allows for setting local (ship) time relative to UTC (GMT)
received in NMEA sentences if Time to GPS is switched on.
Coordinate system parameter sets up a coordinate system (WGS-84, СК-42, СК-
95, ПЗ-90, ПЗ-90.02) to display received data. At the same time the output to the external
devices (ports) is still carried out in coordinate system – WGS84.
2.3.10 Alarms tab page
Alarms tab page ensures settings of alarm activation by the data received from the
external devices and systems, see Figure 12.
Figure 12 – Alarms tab page
The following controls are located in Alarms tab page, see Table 10.