Need help?Do you have a question about the MSA FieldServer BACnet Router and is the answer not in the manual?
General| Network Interfaces | Ethernet, RS-485 |
|---|---|
| Ports | 1 x Ethernet, 1 x RS-485 |
| Power Supply | 24VAC/VDC |
| Mounting | DIN Rail or Wall Mount |
| BTL Listed | Yes |
| Protocol Support | BACnet/IP, BACnet MS/TP |
| Operating Temperature | -40°C to 70°C (-40°F to 158°F) |
| Connectors | RJ-45, Terminal Block |
| Humidity Range | 5% to 95% non-condensing |
| Certifications | CE, FCC |
Details how to mount the gateway using the DIN rail mounting bracket.
Instructions for wiring and connecting the RS-485 ports, including DIP switch settings.
Steps to discover and connect to the BACnet Router using the FieldServer Toolbox application.
Procedure for the initial login to the FieldServer GUI, addressing security warnings.
Instructions for configuring IP address, Netmask, Gateway, and DNS servers for Ethernet 1.
How to access the BACnet Router configuration section from the Web App landing page.
Steps to discover and populate a list of devices on the BACnet network.
Steps to create a new account for the MSA Grid FieldServer Manager service.
Explanation of how tooltips provide context-sensitive help for input fields.
Instructions for modifying web server security after initial setup, requiring a reboot.
To Next Page
