Model S4100C
13
Do not over tighten such that the O’Ring is damaged
Screw Continuity Hex Nut (P/N 928-814) on the inside of the S4100x Housing to the
Earth/Stopping Plug (P/N 311001-1).
Tighten to insure it is secure and making good contact with internal continuity plate.
If removing the Earth/Stopping Plug (P/N 311001-1), unscrew Continuity Hex Nut (P/N
928-814) on the inside of the S4100x Housing from the Earth/Stopping Plug.
Unscrew the Earth/Stopping Plug (P/N 311001-1) from the Top Entry of S4100x
Housing.
To Next Page
