Introduction
1-3
- AGP specification compliant
- AGP 66/133MHz 3.3V device support
! One CNR (Communication Network Riser) slot
! Five 32-bit Master PCI Bus slots
! Supports 3.3V/5V PCI bus Interface
On-Board IDE
! An IDE controller on the VIA
®
VT82C686B chipset provides IDE HDD/
CD-ROM with PIO, Bus Master and Ultra DMA 66/100 operation modes.
! Can connect up to four IDE devices
Promise RAID (Optional)
! Supports RAID 0 or 1
! Can connect up to four IDE HDDs (ATA33/66/100)
On-Board Peripherals
! On-Board Peripherals include:
- 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and
2.88Mbytes.
- 2 serial ports (COM A + COM B)
- 1 parallel port supports SPP/EPP/ECP mode
- 4 USB ports (2 Rear Connectors/ 2 from USB Front Pin Header -- one of
the ports supports USB PC to PC Networking function)
- 1 IrDA/HP connector for HPSIR
BIOS
! The mainboard BIOS provides Plug & Play BIOS which detects the
peripheral devices and expansion cards of the board automatically.
! The mainboard provides a Desktop Management Interface(DMI) function
which records your mainboard specifications.
Dimension
! ATX Form Factor: 25.4cm (W) x 30.4cm (L)
Mounting
! 9 mounting holes
To Next Page
Loading...
